Viking Range DFFB530 Guide d'installation télécharger pdf (Page 32)

Remove four side screws and remove unit top.

Loosen the four hinge screws. Adjust door.

Retighten four hinge screws.

Replace unit top and four side screws.

Attach one 2 x 4 to wall stud (refer to dimensions page

for exact location).

If needed, depending on cabinet and depth,

attach second 2 x 4 to first 2 x 4.

Front of unit

1 3

Wall

2 x 4

Refrigerator

Wall

2 x 4

Refrigerator

Hinge Adjustment

Plug in power cord to verify operation.

Note: Make sure power switch and

showroom switch are in the “On” position.

3”

3”3

”

10a

Place unit within 3” of being flush with cabinets.

Note: To avoid cabinet damage, place cardboard

between cabinets and unit. When moving unit,

DO NOT crimp, kink or crush water supply line.

10b

Carefully move unit until semi flush with cabinet

(depending on unit).

Pull supply tubing forward under unit.

Note: DO NOT use plastic water lines.

Flush water line by running two quarts of water

into a bucket. Turn water off

Connect supply tube to water valve using

a 1/2” wrench. Note: DO NOT overtighten.

Turn on water supply and check for leaks.

Installation (cont.)

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38

Pas de commentaire

Viking Range DFFB530 Guide d'installation Page 32